geddy lee yyz pedal Tech 21 YYZ Geddy Lee Shape-shifter Signature SansAmp Pedal
SKU: 22981892996
geddy lee yyz pedal

geddy lee yyz pedal Tech 21 YYZ Geddy Lee Shape-shifter Signature SansAmp Pedal

$19.85 $22.05
Save 10%
No.2 Bestseller on banglarkotha24.com >

Pay in installments of $5.51 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 3 - Jul 8

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

geddy lee yyz pedal Tech 21 YYZ Geddy Lee Shape-shifter Signature SansAmp PedalTech 21 YYZ Geddy Lee Shape shifter Signature SansAmp Pedal Geddy Lee's melodic playing is replete with harmonic ear candy, eschewing run of the mill root note plodding for higher register, lead like parts. Hard hitting bass lines like Lee's demands an equally hard hitting tone. That's where the Tech 21 YYZ Geddy Lee Shape shifter Signature SansAmp comes in. The YYZ packs the essence of Geddy Lee's tone and his gargantuan rack rig into a compact

Tech 21 YYZ Geddy Lee Shape-shifter Signature SansAmp Pedal

Geddy Lee's melodic playing is replete with harmonic ear candy, eschewing run-of-the-mill root-note plodding for higher-register, lead-like parts. Hard-hitting bass lines like Lee's demands an equally hard-hitting tone. That's where the Tech 21 YYZ Geddy Lee Shape-shifter Signature SansAmp comes in. The YYZ packs the essence of Geddy Lee's tone — and his gargantuan rack rig — into a compact preamplifier/DI pedal. And, best of all, this fly-by-night setup does it without sacrificing an ounce of tone. To top it off, you can even pipe this massive tone straight into a PA. This all-analog pedal supplies you with an expansive range of adjustability, unlocking a wide spectrum of bass tones. If you're searching for way to achieve a colossal bass sound without a bulky stack of speaker cabs, take the YYZ Geddy Lee Shape-shifter SansAmp for a test drive — it delivers a thunderous tone worthy of the limelight.

FEATURES
  • Replicates the heavy-hitting sound of Geddy Lee's bass rig
  • Individual Drive and Master controls for dialing in grit and volume
  • 3-band active EQ attains near-unlimited sound sculpting
  • Selectable Boost stomp switch delivers a 12dB presence boost for increased top-end distortion
  • Shape-shifter button adds 6dB of "Schmegilka" on top
  • Mix control enables you to mix in unaffected signal for added clarity
  • Rugged, all-metal housing
SPECIFICATIONS
  • Pedal Type:Preamplifier/DI
  • Analog/Digital:Analog
  • EQ:Active 3-band EQ
  • Inputs:1 x 1/4"
  • Outputs:1 x 1/4"
  • Power Source:DC power supply (sold separately)
  • Power Usage:21mA
  • Batteries:1 x 9V

FAQ

Is warranty coverage available for my product?

Yes! Majority of our product provides a minimum 1 year warranty on the electronic parts.

Can I test the product prior to my purchase?

Definitely! You can contact our sales team through 016-3111286 or head over to Music Bliss showroom to view the item before buying it. We are honored to have you here!

Is a power supply needed for the pedals?

We highly recommend you to connect to a power supply for your pedal(s). This minimizes the hum and ensure that your pedals get the cleanest power supply with optimum output and tone.

How long will it take to deliver?

It usually takes only 3-7 working days for the item to be safely delivered to your doorstep. Self-collection and Lalamove (local delivery) is available as well!

Can I self-collect my item(s)?

Of course! You can head over to Music Bliss showroom for self-collection during our working hours.
10am - 7.30pm (Mon - Thurs)
10am - 7pm (Fri - Sat)
10am - 6pm (Sun)

Can I use Lalamove / Grab / Same Day Delivery as a delivery option?

Yes! Please note that the delivery hour for Lalamove service is only available for local delivery, from 11am to 5pm daily. For delivery ,please check out choosing Lalamove/Grab service or contact the mainline 016-3111286.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 22981892996

Discover Niche Categories That Outsell geddy lee yyz pedal

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 2467 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
ralversity
Pawtucket, US
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
T
Verified Purchase
Talagand
Chelsea, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
B
Verified Purchase
Barbara McCloud
Carnegie, US
★★★★★ 5
Nice and strong
Color: Black, Size: Wheel-6 Panel
Nice and strong, tedious, putting together, but very good quality
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 17, 2026
A
Verified Purchase
Al Tompkins
Fort Morgan, US
★★★★★ 5
if you are going to be moving them a lot, buy something more sturdy.
Color: Black, Size: Wheel-6 Panel
I use these at our churchc. They are pretty good, not terribly study and the screw that hold the faabric have pulled out in a couple of places. But they wqould work especially well if you were not constantly moving them as we do. They are a bit of a pain to assemble.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 20, 2026
J
Verified Purchase
Julie Lincoln
Belleville, US
★★★★★ 4
Easy to put together , decent quality
Color: Black, Size: Wheel-6 Panel
Purchased for office, easy to put together , durable quality , exactly what we needed to partition a small space
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 15, 2025

recommand products

Gear 5 monkey D Luffy laughing Oversized Hoodie – The STATIC Store
29.63
Gear 5 Luffy
27.92
One Piece Mugiwara Luffy Gear 5 Epic Pose Hoodie Style 2
23.47
Gear 5 Luffy Hoodie – One Piece Anime Streetwear – Onigiri Apparel
26.05
Luffy Gear 5 Women Premium Hoodie – EYESTOP
20.44